Andis 04521 Replacement T-Blade for T-Outliner Trimmer

Description

product description
3D BARBER Premium Carbon Steel Blade
Suitable model:
Suitable for Andis power failure
Suitable for Andis GTX
Suitable for Andis T-outliner
Suitable for Andis T-outliner cordless
.benefit:
Advanced carbon steel technology makes our carbon steel blades 5 times sharper
Duration extended by 5 times
Keep 5 times cooler
lasting:
Made of high-tech carbon steel material, it can keep sharp for a longer time.
Heat resistance makes cutting cooler and more comfortable.
The Rockwell hardness scale is 78.
Easy installation:
This replaces the small mobile blade.
It can also be used to upgrade steel blades to carbon steel blades.
Save you money:
Save your money now and buy high-quality and durable carbon steel blades! ! !
0 clearance for installing and adjusting the blade
1. Using a screwdriver, remove the screws from the trimmer.
2. Install the plate and put the metal gasket on the top. And don’t tighten the screws to leave a little room for the plate. So the plate can move up and down. This can bring the moving blades closer to the guide blades.
3. Turn the moving blade toward the guide blade. Then you need a flat surface, lay it flat and make a little angle for the guide vane, such as 10 degrees, so the moving blade is a little bit under the guide vane. Tighten the screws from that angle. Then don't cut yourself because the knife is very sharp.
4. Check whether it is normal. Cross the blade with your fingers and adjust it if it is smooth. If it is rough, it means that the movable blade is higher than the guide blade, and you need to try a few more times.
5. Reinstall the blade on the trimmer head and tighten the two screws.
100% quality assurance-buy with confidence and add to the shopping cart now! We provide 100% customer support and a 12-month product warranty.